home

clear breadcrumbs

search

login

DSM Forward Programming

Setting up SAFE and AS3X AS3X is activated when throttle is above 25% and remains active until power is removed ShanesDIY tutorial Part 1 https://www.youtube.com/watch?v=Wq2OpoMILYw Part 2 https://www.youtube.com/watch?v=bzWeMaahJhk Part 3 https://www.youtube.com/watch?v=mEfLGnEZN9U&t=1379s Scripts: https://github.com/frankiearzu/DSMTools Copy the lua file and the DSMLIB folder to the tools directory on the SD card Copy or create the DSMDATA folder in the models directory on the SD card Connect to the AR631 with the Spektrum programming cable Update to the latest firmware Open the system forward programming script Model setup -- populating the DSMDATA folder on the radio Add the flight mode switch to channel 5 in mixes Power up the receiver Open the system forward programming script Forward Programming RX Do a factory reset to unlock it First time setup After any control surface changes - relearn servo After any control surface changes - relearn servo Be sure that Max Throws are not enabled in the model setup (right below RF Protocol)